Unlock-iPhone.org News

Step One
Press to launch Cydia from your iPhone Springboard.

Step Two
Press to select Manage from the tabs at the bottom

Step Three
Press the large Sources button.

Step Four
Press the Edit button at the top right of the sources list.

Step Five
Press the Add button that appears at the top left.

Step Six
Enter http://apt.dmytro.me as the Cydia/APT URL then press the Add Source button.

Step Seven
Cydia will now update your sources. Press the large Return to Cydia button when finished.

Step Eight
Press the Done button at the top right of the sources list.

Step Nine
Press to select the apt.dmytro.me source we just added

Step Ten
Tap to select the USB Drive package from the list of packages

Step Eleven
Press the Install button at the top right of the screen.

Step Twelve
Press the Confirm button at the top right of the screen

Step Thirteen
Cydia will now install your package. When it has completed successfully, press the large Return to Cydia button.

Step Fourteen
Press the Home Button to return to your Springboard then press to launch USB Drive from your list of applications.

Step Fifteen
First we must create a Virtual Disk on the iPhone. Press the Create Disk… button to continue.

Enter a name for your virtual disk and use the slider to specify how much space you would like to allocate it. When done click the Create button at the top right of the screen.

Step Sixteen
Now that we have created a disk to access we must specify the USB Mode. You have three choices:

Drive + iTunes:
In this mode USB Drive replaces Picture Transfer Protocol (PTP) interface with Mass Storage interface and lets you use the iPhone as a USB Drive. At the same time you can perform iTunes synchronization, developers can use XCode debugger ,etc. In this mode USB Mass Storage will not work on Windows with iTunes or Apple USB Drivers installed.

Default:
This is the iPhone default mode. USB Drive doesn’t install daemon application nor modify any USB settings. Picture Transfer Protocol (PTP) is active as well as iTunes synchronization and tethering over USB.

Drive Only:
This mode is to resolve compatibility issues with Windows and iTunes. In this mode USB Drive changes the iPhone’s USB product ID. This will prevent iTunes synchronization, but USB Mass Storage will work on Windows (and other operating systems). Switch to the Default or Drive + iTunes mode will restore iTunes sync.

Press to select the mode of your choice. We chose Drive + iTunes because we rarely need Windows compatibility.

A popup will appear asking you to reboot to apply the changes. Press the large Reboot button.

Step Seventeen
Once your iPhone reboots you will now be able to access the virtual disk you created using USB Drive.

***THANKS: This is one of the most useful iPhone utilities we have ever seen. A big thanks goes to dmp for creating this app!

Unlock iPhone 3G Unlock iPhone 2G Unlock iPhone 3GS

Step One
Press to launch Cydia from your iPhone Springboard.

Step Two
Press to select Manage from the tabs at the bottom of the screen.

Step Three
Press the large Sources button.

Step Four
Press the Edit button at the top right of the screen.

Step Five
Press the Add button at the top left of the screen.

Step Six
Input http://repo.beyouriphone.com then press the Add Source button.

Step Seven
Once the source has been successfully added, press the large Return to Cydia button.

Step Eight
Press the Done button to exit Edit mode.

Step Nine
Press to select the BeYouriPhone repository from the list of sources.

Step Ten
Press to choose SIManager from the list of packages.

Step Eleven
Press the Install button at the top right of the screen.

Step Twelve
Press the Confirm button to begin installation.

Step Thirteen
Once installation has completed successfully press the Return to Cydia button.

Step Fourteen
Press the Home button to return to your Springboard then tap the SIManager icon to launch the application.

Step Fifteen
Once the program has opened you can use the Setup button at the top left to enable Fast Read as well as set the SIM name format. ie Firstname/Lastname or Lastname/Firstname.

Step Sixteen
To read your contacts from the SIM card press the Read from SIM button at the bottom of the screen.

Once all the contacts have been loaded they will be displayed on the screen.

Step Seventeen
You can press to select a contact and choose to Modify, Delete, or Import it.

Step Eighteen
To add a contact to your SIM card you can press the + button at the bottom of the main screen.

Navigate through your contacts and select the one you would like to add.

Then select the specific number or press the Add all button if you would like to add all the contacts numbers. Press the SIManager button at the top left to return to the main screen.

You will notice that the contact has been added to the list and appears on a green background. This means that when you write to the SIM card this contact will be added.

Press the Write to SIM button at the bottom right to commit your changes to the SIM card. Notice when you are done the contact now appears on a black background similar to the other contacts in your list.

Step Nineteen
SIManager also allows you to copy all the contacts on your iPhone to the SIM card. Press the Gear icon at the bottom of the screen then press the large Copy iPhone to SIM button.

You will be asked to confirm this action. Press the OK button.

If you have more then 200 numbers you may be informed that the SIM is full. Press the large OK button.

To commit the changes to the SIM card press the Write to SIM button at the bottom of the screen.

Step Twenty
You can also use SIManager to empty your SIM card. Press the Gear icon at the bottom of the screen then press the Empty SIM button.

Press the OK button to confirm the action.

Notice all the numbers to be deleted have a red background. Press the Write to SIM button to commit the changes.

Once done your list of contacts on the SIM card will be empty!

Unlock iPhone 3G Unlock iPhone 2G Unlock iPhone 3GS

Step One
Press to launch Cydia from your SpringBoard

Step Two
Press to select the Sections tab at the bottom of the screen

Step Three
Press to select Messaging from the list of Categories

Step Four
Press to select ActivateMMS2G from the list of Packages

Step Five
Press the Install button at the top right of the screen

Step Six
Press the Confirm button at the top right to begin installation.

Step Seven
Once installation has completed successfully press the large Reboot Device button.

Step Eight
You iPhone will now be automatically restarted. Once the reboot has completed tap to open the messages application from the Springboard.

Notice you now have MMS capabilities. Please be aware that your cellular provider may charge an additional fee for using MMS. Please contact them before send an MMS to verify charges.

Thanks go out to geniusan the author of this patch! You can learn more about how to use MMS here

To input your networks settings please navigate to Settings – General – Network – Cellular Data Network Settings

Unlock iPhone 3G Unlock iPhone 2G Unlock iPhone 3GS

Step One
Press to launch Cydia from your SpringBoard.

Step Two
Press to select the Manage tab at the bottom of the screen.

Step Three
Press the large Sources button.

Step Four
Press the Edit button at the top right of the screen.

Step Five
Press the Add button at the top left of the screen.

Step Six
Enter http://cydia.iphoneil.net as the new source address and tap the Add Source button.

Step Seven
Once the source has been successfully added press the large Return to Cydia button.

Step Eight
Press the Done button to exit Edit mode.

Step Nine
Press to select the newly added cydia.iphoneil.net repository.

Step Ten
Press to choose Push Fix from the list of Packages

Step Eleven
Press the Install button at the top right of the screen.

Step Twelve
Then press the Confirm button to beginning installation

Step Thirteen
Once installation has completed successfully press the large Reboot Device button to reboot your iPhone.

Unlock iPhone 3G Unlock iPhone 2G Unlock iPhone 3GS

rerequisites: You must be jailbroken on the iPhone 3.1.2 firmware. You need to have SSH installed and you need to know the IP Address of your device on the local network. Finally you will also need Fugu installed.

Step One
Create a folder on your desktop called Pwnage. In it place the patch file for your appropriate device. [3G] [3GS]

Step Two
Double the download zip file to extract its contents. You will get a folder called CommCenter_3g_312 or CommCenter _3gs_312.

Step Three
Launch Fugu from your applications folder.

Step Four
Input your iPhone’s IP Address in the Connect To: field and use root as the Username. Click the Connect button to continue. For this to work you must have SSH installed.

When prompted input alpine as the password then click the Authenticate button.

Step Five
Once Fugu opens the directory contents of your device, use the left panel to navigate to the Pwnage folder on your desktop.

Next, click the Go To.. button on the toolbar.

Input /System/Library/PrivateFrameworks/CoreTelephony.framework/Support/ into the Go To field, select Remotely, then click the Go button.

Drag the CommCenter file from the right panel into the left panel to copy it to your computer.

Step Six
Launch Terminal by double clicking it from the Applications:Utilities folder on your computer.

Execute cd Desktop/Pwnage to navigate to your Pwnage folder.

Execute bspatch CommCenter CommCenter-patched CommCenter_3g_312/CommCenter3g.patch to make a patched version of the CommCenter.

IMPORTANT: Remember to change 3g to 3gs if you have the iPhone 3GS. ie. bspatch CommCenter CommCenter-patched CommCenter_3gs_312/CommCenter.patch

Now we need to confirm that the patched file was created successfully. Input this command into the Terminal window to check: /usr/bin/openssl sha1 CommCenter-patched.

Check your SHA1 with the correct ones below to make sure the patch occurred successfully. If it did not. Do not continue.
1b19712035f33654cf72838ebe1a2033931b56b2 # 3GS
063165c3fa3e21d30eb4b486fab924ba3ef0ea5e # 3G

Step Seven
Return to Fugu and Control-Click CommCenter in the right panel. Select Rename from the contextual menu and rename the file to CommCenter-backup.

Click the Reload button on the toolbar if necessary then drag the CommCenter-patched file from the left panel to the right.

Control-Click the CommCenter-patched file from the right panel and select Get Info from the contextual menu. At the bottom of the Info window change the permissions to 0755 and click the Apply button.

Control-Click the CommCenter-patched file in the right panel and select Rename from the contextual menu. Rename the file to CommCenter.

Step Eight
You may now reboot your iPhone and you will be able to use Internet Tethering. You may need to follow this tutorial to apply the correct settings for your carrier.

Unlock iPhone 3G Unlock iPhone 2G Unlock iPhone 3GS